Some of the common problems of computer and their solutions.

I'm trying to promote the use of common problems of computer, we had a lot of time in our daily lives, but we do not know their real reasons and workarounds. I hope all of you like this post and this article is about the positive ideas maintainable. So, let’s start-

Read More ...

1.         The monitor's light will up-down.

þ      Monitor Cable, Data Cable, RAM, display card, in connection with the above, check all connections. This is due to the connection of the Light.

2.         The 3 beep running-

þ         There was a problem connecting to the RAM. RAM is usually made ​​at the beep words.

3.         Three beep sound (1 is the smaller of the two)-

þ         The problem with the display card's connection. Make it clear.

4.         After some time, the three beep sound-

þ         There was an error in BIOS or RAM. (Basic Input Output System) (Random Access Memory)

5.         Nonstop beep sound of running

þ         The problem of the keyboard. What the press has been a long time.

6.         FDD LED running the way it should be bright-

þ         I would just like to connect the data cable (Twisted Cable). He's just not that into use.

7.         You do not have a display screen-

þ         Hard Disk Cable has been fitted incorrectly. Red Mark is well known to be on the computer.

8.         If power LED closed-

þ         Check the main power card.

þ         Check S.M.P.S

þ         Check the motherboard connection.

þ         Check the switch of CPU & Monitors.

9.         Incorrect showing CMOS-

þ         Mother Board, please replace the battery of 3 volts. I manually set the original settings. (refer-CMOS Setup Chart). Enter your search a name in the search form and submit it.

10.       FDD floppy drive is faulty or does not work properly-

þ         Check the power cord of FDD & data cables. CMOS is set and the last time I check the drive.

11.       HDD error and hard disk failure-

þ         Check the Power Cord, HDD Connection, Data Cable.

þ        CMOS parameters of the hard disk and check the Auto detecting Partitions by Fdisk command, then set track 0 on the set.

12.       Mother board's power supply problems due to the hang-

þ         Check the S.M.P.S.

þ         RAM just is not working.

þ         Software problem (due to the use of counterfeit software).

þ         CPU fan does not work properly.

þ         Hot air not well inside of CPU.

13.       Jumping Screen-

þ         Check the display cards connection.

þ         The problem of virus

þ         Video Memory Problems.

14.       Moving Screen-

þ         Aerating problem.

þ         Magnetic wave come.  

15.       CPU Cabinet Shock-

þ         Check aerating.

þ         Check the main power cord

16.       Non - System disk error-

þ         No disk in the floppy drive and the other (Non-bootable) or the hard disk is not set properly for the parameters of the CMOS

þ         The hard disk may not be Partitioned.

þ         The hard disk can not be removed.

17.       Operating system does not find-

þ         Some systems, such as file {command.com} - {User File IO.SYS & MS_ DOS.SYS} - Hidden files can not be found. These three are required for the start of the file system, the SYS C: command or by time formatting format c :/ u / s transfer can be used.

18.       The command is interpreted not find-

þ         Virus infected or deleted Command.com file

19.       I / O ERROR shown-

þ         CMOS may not be set correctly on the hard disk.

þ         This format is used for the operating system may not be valid.

20.       DEVINE OVER-FLOW MESSAGE Show-

þ         Some of the directories or files with other files will crash

þ         CHKDSK / F command to correct or SCANDISK

21.       Processing of the hard disk is the problem-

þ         The power supply is properly
þ         Check whether the connection is weak
þ         Y connectors for hard disk, do not use
þ         It can create bad sectors on the hard disk or weak

22.       Processing of the time when the hard disk hang-

þ         Bad Sector Check with CHKDSK or SCANDISK Command. If you do, then hard disk format and partition the area previously set. (Bad Sector of the hard disk for use with this method), or (Bad Sector can not use the Standard Power Supply)

23.       Hard Disk Detector is the inability to-

þ         Check the power connector

þ         Data Cable Testing.

þ         Checking Jumper

24.       The partition is not shown-

þ         The hard disk where the operating system's format is not supported with the current Mother board. For example: the Pentium that the hard disk has been formatted, it will hide the 486 system partitions.

25.       MMX / DLL file not found in the find-

þ         Power fails or files are corrupted due to virus may be. I will bring the file from another computer. Or Windows 98 operating system to be installed again. (This will not change any data on the computer)

26.       Windows registry errors-

þ         Suddenly the system's on / off because of it. The last solution is to re-install the operating system.

27.       Do not match the display color-

þ         Display Card properly with their CD Set.

þ         Standard settings for Windows on a 800 * 600 is set. It helps to work well

28.       Unknown device found-

þ         Driver utility is not provided with the operating system and can be. Of the device driver CD for the software to install.